Schrittmotor: bipolar, 200 Schritte/Umdrehung, 35 x 26 mm, 7,4 V, 280 mA Abverkaufen Many I/O lines in a

Many I/O lines in a small package 15 general-purpose I/O pins available along the sides of the board

It is possible to solder onto the tabs but you must be very fast because if your iron is not good quality or you dally even a few seconds

Hardware-Gain von 2000

allowing this version to power servos and other high-power peripherals for which the battery voltage would be too high

Schrittmotor: bipolar, 200 Schritte/Umdrehung, 35 x 26 mm, 7,4 V, 280 mA Abverkaufen Many I/O lines in aThis hybrid bipolar stepper motor has a step angle of 1. 8 (200 steps revolution). Each phase draws 280 mA at 7. 4 V, providing a holding torque of 650 g cm (9 oz in). The motor has four color coded wires with bare leads: black and green connect to one coil, and red and blue to the other. It can be controlled via a pair of suitable H bridges (one for each coil), but we recommend using a bipolar stepper motor driver. A 5 mm universal mounting hub